From $3,898.00
3 stores
The iOptron CEM40EC is a medium weight equatorial GoTo mount with a weight capacity of 40 pounds, featuring a high-resolution RA encoder for <0.25 arc-second accuracy, an integrated electronic polar finder (iPolar), a Universal Self-Centering Saddle that accepts both Losmandy and Vixen style dovetail plates, GPS, and an internal cable management system. The center-balanced equatorial mount design places the balance point directly over the tripod, resulting in greater stability and allowing a better weight capacity to mount weight ratio—enabling the 15.8 pound mount head to carry up to 40 pounds. Equipped with a high-resolution right ascension encoder, this EC version delivers real-time tracking correction with ±0.25 arcsecond RMS accuracy without requiring constant autoguiding intervention. For long focal length astrophotography, the CEM40EC's sub-arcsecond encoder tracking enables confident 5–10 minute exposures with minimal guiding correction—and in some cases, even unguided.
Astronomics
CEM40EC Center Balanced GoTo Equatorial Mount With 1.5" Tripod
$3,898.00
Astronomy Plus
CEM40EC
CA$5,739.00
~$4,194.10
High Point Scientific
CEM40EC High Res Center Balance Equatorial Mount with iPolar, Hard Case and 1.5" Tripod
$4,289.00
| Slew Speed | 4.5° |
| GPS | 32-channel integrated |
| Communication Ports | USB, ST-4, DC Power |
| Motor Resolution | 0.08″ |
| Bearings | 68 mm |
| RA Tracking Accuracy | 0.25″ |
| Worm Wheel Teeth | 216 |
| Mount type | Center-Balanced German Equatorial Mount |
| Latitude Range | 0° |
| Power Requirements | 12 V |
| Polar Alignment System | iPolar electronic polar scope |
| Payload Capacity | 40 lb |
| Azimuth Adjustment | 6 |
| Power Consumption (Tracking) | 0.6 A |
| Dovetail Compatibility | Losmandy and Vixen-style |
| Worm Wheel Diameter | 110 mm |
| Motor Type | Precision stepper motors, 1.8°, 128 micro-steps |
| RA/DEC Axles | 45 mm |
| Mount Head Weight | 15.8 kg |
| Periodic Error (Typical) | 7″ |
| Hand Controller | Go2Nova 8407+ |
| Power Consumption (GoTo) | 0.9 A |
| Material | CNC-machined aluminum with steel axles |
| Worm Gear Diameter | 17 mm |
| Periodic Error Correction | Real-Time PEC (RPEC) |
| Object Database | 359 |
| Autoguider Port | ST-4 Compatible |
| Exterior Finish | Red/black anodized |